.
Νέα προϊόντα
Italian Army WWII light truck FIAT SPA CL39 Coloniale
available in 1/72 - 1/48
3D printed resin kit
Autoblindo Vespa Caproni, experimental vehicle, WWII Italian Army armed with a 6,5 mm Scotti MG.
available in 1/72 - 1/48
3D printed resin kit
1:48 crashed Kübelwagen (approximately 120mm long and 30mm high)
(Windscreen is cast solid in resin and is designed to be easily removed and replaced with a piece of clear plastic!)
* Supplied unpainted.
28mm Stack of cut logs (approximately 120mm long and 30mm high)
Forestry scenics: stack of cut firewood logs, cleaned up and piled, ready for chopping.
* Supplied unpainted. The figures are not included, they are shown as a size reference only
28mm Stack of felled tree trunks (approximately 120mm long and 30mm high)
Forestry scenics: a stack of freshly felled spruce tree trunks, cleaned up and piled, ready for collection.
* Supplied unpainted. The figures are ashown as a size reference only, they are not included.
28mm "Dragon's Teeth" - 36 pieces anti-tank reinforced concrete barrier (German)
The pack contains enough teeths for a foot of terrain using the full five teeth configuration, but you can cover twice as much space using a less deep formation (3 teeth), and up to four feet using a double line
* Supplied unpainted. The figures are ashown as a size reference only and are from our own 1-48COMBAT range, they are not included.
Short straight log entrenchment (1 section approximately 85mm long and 30mm high)
Fortifications made with dirt and rocks piled against a structure of freshly cut logs. This section is designed to match with all our other modular fortifications
* Supplied unpainted. - The figures are not included, they are shown as a size reference only
Log entrenchment corner (1 section approximately 85mm long, 45mm wide and 30mm high)
Fortifications made with dirt and rocks piled against a structure of freshly cut logs.
Supplied unpainted.
* The figures are not included, they are shown as a size reference only
Sandbag entrenchment long straight sections (2 different, each approximately 160mm long and 30mm high)
Fortifications made with sandbags piled over foundations of discarded boxes and drums filled with soil replaced trenches dug in the ground when this was not possible or not convenient.
Supplied unpainted
Short straight sandbag entrenchment (1 section approximately 85mm long and 30mm high).
Fortifications made with sandbags piled over foundations of discarded boxes and drums filled with soil replaced trenches dug in the ground when this was not possible or not convenient.
28mm Sandbag entrenchment corner
Fortifications made with sandbags piled over foundations of discarded boxes and drums filled with soil replaced trenches dug in the ground when this was not possible or not convenient.
28mm Sandbag Bunker (4 pieces)
A much larger sandbag bunker, comes with a separate roof piece and two "L" shaped sections of fortifications plus a small ammo boxes pile. Can comfortably fit four in, with some room to spare, so plenty of space to use it as a machine gun nest, for a recoilless gun fortified position or as a command post.
28mm Frontline Sentry Post (3 pieces)
A typical sandbags strongpoint with a separate roof piece and two different "L" shaped sections of fortifications made with sandbags piled over foundations of discarded boxes and drums filled with soil.
The covered position size is approximately 80x60mm and the height is 60mm with the roof on. It can hold comfortably two large figures on 25mm round or square bases. The two sandbagged sections are 90x75mm and 90x70mm respectively, both approximately 30mm high. The figure shown as a size reference only is from our own 1-48COMBAT range and it is not included.
Supplied unpainted.
28mm AT gun sandbags emplacement
include a small ammo stock complete with a fuse setting station on top and a pile of discarded ammo boxes and used shells. It is specifically designed to be used with heavy Anti-tank guns, such as German 50mm (PaK 38) and 75mm (PaK 40 and PaK 41), American 3 inch M5s, Russian 45mm, ZiS-2 57mm, ZiS-3 and F-22 USV 76mm or British QF 6 and 17 pounders, although it can of course work for any gun of similar or smaller size and in virtually any theatre!
the gun position size is approximately 120x70mm and the max height is 32mm. The figure shown as a size reference only is from our own 1-48COMBAT range and it is not included
Supplied unpainted.
28mm HMG sandbags emplacement
Includes a separate piece featuring a jerrycan of water and a spare ammo box, which would be kept a little behind, also well protected with sandbags. As usual plenty of beautifully deep sculpted surface detail to help you in painting and this piece can be used for basically any 19th Century conflict up to the most futuristic settings!
The figure shown as a size reference only is from our own 1-48COMBAT range and it is not included
Supplied unpainted.
28mm strongboxes, warchest and casket (15 pcs.)
this set includes 15 individual pieces, 3 each of 5 different design. Inexpensive and ready to use (no assembly required!),
unpainted
28mm wicker baskets (18 pcs.)
this set includes 18 individual baskets, 3 each of 6 different design. Inexpensive and ready to use (no assembly required!),
* unpainted