Junkers J.2  The first all-metal aircraft with Mercedes D.II engine

Resin model for experienced modellers, Contains small 3D printed parts, Decals

ANBO-V - military training airplane with Walter Vega 5-cylinder engine

Resin model for experienced modellers, Contains small 3D printed parts, Decals

ANBO-III - The 2nd series reconnaissance airlpane with Walter 'Mars" 9-cylinder engine

Resin model for experienced modellers, Contains small 3D printed parts, Decals

ANBO-III - The first series reconnaissance airlpane in two versions

 - with short rudder

 - with long rudder

Resin model for experienced modellers, Contains small 3D printed parts, Decals

DOBI-I - The first airplane of Lithuanian design.

Resin model for experienced modellers, Contains small 3D printed parts, Decals

This hand-made diorama is a 1/72 representation of an IDF/AF pen (Version 1: Yellow half circle) in Israeli service for many years now.

The item is constructed on a wooden-frame base and measures approx. 400 mm (length) x 300 mm (width) x 55 mm (height) (15.8 inch x 11.8 inch x 2.17 inch).

Underside of base is green felt for better positioning.

Aircraft model is not included. 

This hand-made diorama is a 1/72 representation of an IDF/AF pen (Version 2: Red-White Diagonal Lines half circle) in Israeli service for years now.

The item is constructed on a hardened foamboard surface and measures approx. 425 mm (length) x 320 mm (width) x 40 mm (height) (16.7 inch x 12.6 inch x 1.6 inch).

Aircraft model and ground equipment accessories are not included. 

Diorama print for aircraft models.  Models not included. 

available in

• 1/144 -  148 mm x 105 mm Printed on cardstock.
• 1/100  - 223 mm x 158 mm Printed on cardstock.
• 1/72   -  310 mm x 219 mm Printed on cardstock.
• 1/48   -  395 mm x 280 mm Printed on cardstock.
• 1/32   -  593 mm x 400 mm Plotter-printed on heavy paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models.  Models not included. 

available in

• 1/144  - 183 mm x 110 mm Printed on cardstock.
• 1/72   -  365 mm x 220 mm Printed on cardstock.
• 1/48   -  548 mm X 330 mm Printed on cardstock. composed of 2 prints
• 1/32   -  821 mm x 495 mm Plotter-printed on heavy paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models. 

1/72 - 1/48 : 3 prints included: Base + background + 3D printed component (card, NOT resin or plastic)
1/144 - 1/32 :  2 prints included: Base + background

Models not included. 

available in

• 1/144  - 148 mm x 105 mm Printed on cardstock.
• 1/72   -  310 mm x 219 mm Printed on cardstock.
• 1/48   -  395 mm x 280 mm Printed on cardstock.
• 1/32   -  593 mm x 400 mm Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models. 2 prints included: Base + background.  Models not included. 

available in

• 1/144  - 148 mm x 105 mm Printed on cardstock.
• 1/72   -  310 mm x 219 mm Printed on cardstock.
• 1/48   -  395 mm x 280 mm Printed on cardstock.
• 1/32   -  593 mm x 400 mm Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models. 2 prints included: Base + background. Models and accessories not included. 

This set is ready to receive 3D items (not included) to create an impressive 3D diorama (see below explanatory image). The first sheet depicts a ground surface to which a photoetched or resin PSP part may be added; the second is a modified backdrop sheet ready to receive

available in

• 1/144  - 148 mm x 105 mm Printed on cardstock.
• 1/72   -  310 mm x 219 mm Printed on cardstock.
• 1/48   -  395 mm x 280 mm Printed on cardstock.
• 1/32   -  593 mm x 400 mm Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models.  Models not included. 

available in

• 1/144  - 2 floor components 93 mm x 132 mm each; 2 wall components 93 mm x 57 mm each; 1 wall components 132 mm x 57 mm; 1 detail set.
  Printed on cardstock.
• 1/72   -  2 floor components 263 mm x 186 mm each; 2 wall components 186 mm x 113 mm each; 1 wall components 263 mm x 113 mm; 1 detail set.
  Printed on cardstock.
• 1/48   -  2 floor components 395 mm x 280 mm each; 2 wall components 280 mm x 170 mm each; 1 wall components 395 mm x 170 mm; 1 detail set.
  Printed on cardstock.
• 1/32   -  3 prints included: 1 floor component 840 mm x 593 mm; 1 wall component 593 mm x 255 mm; 1 wall component 840 mm x 255 mm.  Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models. 3 prints included: Floor + 2 walls. Models not included. 

available in

• 1/144  - 148 mm x 105 x 105 mm Printed on cardstock.
• 1/72   -  310 mm x 219 x 219 mm Printed on cardstock.
• 1/48   -  465 mm x 329 x 329 mm Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.
• 1/32   -  698 mm x 493 x 493 mm Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models.  Models not included. 

available in

• 1/72   -  395 mm x 280 mm Printed on cardstock.

Diorama print for aircraft models.  Models not included. 

available in

• 1/144  - 200 mm x 140 mm Printed on cardstock.
• 1/72   -  395 mm x 280 mm Printed on cardstock.
• 1/48   -  593 mm x 400 mm Printed on cardstock.
• 1/32   -  890 mm x 600 mm Plotter-printed on heavy paper and shipped rolled in a sturdy carton tube.

Diorama print for aircraft models. 2 prints included: Base + background. Models not included. 

available in

• 1/144  - 148 mm x 105 mm Printed on cardstock.
• 1/72   -  310 mm x 219 mm Printed on cardstock.
• 1/48   -  395 mm x 280 mm Printed on cardstock.

Diorama print for aircraft models.  Models not included. 

3 prints included: 1 floor component + 2 wall components

available in

• 1/144  - Printed on cardstock.
  1 floor component 93 mm x 132 mm; 1 wall component 93 mm x 57 mm; 1 wall component 132 mm x 57 mm
• 1/72   -  Printed on cardstock.
  1 floor component 186 mm x 113 mm; 1 wall component 263 mm x 186 mm; 1 wall component 186 mm x 113 mm
• 1/48   -  Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.
  1 floor component 395 mm x 280 mm; 1 wall component 280 mm x 170 mm; 1 wall component 395 mm x 170 mm.
• 1/32   -  Plotter-printed on heavy/thick paper and shipped rolled in a sturdy carton tube.
  1 floor component 420 mm x 593 mm; 1 wall component 593 mm x 255 mm; 1 wall component 420 mm x 255 mm